BETONTEC H5 colorless hydrophobic impregnation for paving

BETONTEC H5 colorless hydrophobic impregnation for paving

BETONTEC H5 hydrophobic impregnation for paving stones is an innovative product created specifically for surface protection concrete blocks and concrete slabs. Its advanced formula, based on Nanotechnology and particles silanes, provides effective protection against dirt and limits the absorption moisture, which is crucial for maintaining the aesthetics and durability of the surface.

Thanks to special silane particles, impregnation creates an invisible barrier that blocks the development mosses i lichens. This protective mechanism contributes to the long-term maintenance of the aesthetics of impregnated surfaces, eliminating the need for frequent cleaning. BETONTEC H5 hydrophobic impregnation for paving stones is characterized by high durability and effectiveness, which makes it an exceptional solution for all types of concrete materials. Silicon particles adhere tightly to structures, which provides exceptional resistance to negative external factors, such as changing weather conditions.

During the period winter this impregnation makes the process easier snow removal i De-icing, which is especially important for paving stones exposed to intense weather conditions. What's more, BETONTEC H5 hydrophobic impregnation for paving stones does not contain any oily substances, so it does not change the color or appearance of the cube. It is also resistant to UV radiation, which additionally increases its durability.

The aspect cannot be ignored either. ease of application; the impregnation can be applied quickly and conveniently, which makes it an ideal solution for people who are looking for an effective way to protect their concrete surface.

Summarizing, BETONTEC H5 hydrophobic impregnation for paving stones is an excellent tool in the fight for the durability and aesthetics of concrete surfaces. Thanks to its effectiveness and simplicity of use, this product will certainly meet the expectations of every user who cares about the appearance and functionality of their space.

Properties of BETONTEC H5 Hydrophobic Impregnation for Paving Stones:

• Hydrophobicity, providing resistance to negative atmospheric factors.
• Does not damage the surface and color of the paving stones.
• Penetration up to a few millimeters: Impregnation provides deep penetration, which guarantees resistance to abrasion and intensive use.
• Strengthening and protection concrete surface from dirt and stains for up to 6 years .
• Does not close pores – concrete still breathes.
• Protection against cracking i erosion, the negative effects of road salt.
• Reducing the risk of lichens, mosses and algae.
• Protects against salt penetration.
• Maintaining aesthetics for years – the cube does not darken even after many years.
• Can be used on new paving stones.

Performance BETONTEC H5 hydrophobic impregnation for paving stones:

Hydrophobic impregnation for paving stones BETONTEC H5 stands out for its high efficiency, which makes it an effective solution for impregnating paving stones. Below are approximate data on efficiency depending on the capacity of the preparation:

• 1 liter: 7 to 10 m²
• 5 liters:  35 to 50 m².
• 10 liters: 70 to 100 m².
• 20 liters: 140 to 200 m².
• 200 liters: 1000m².

Thanks to this high efficiency, BETONTEC H5 is an economical and practical solution for anyone who wants to effectively protect their surfaces against moisture and dirt.

Application:

Impregnation of paving stones, washed stones with sprinkles, old paving stones, curbs and palisades in parking lots, terraces, under driveways, etc.

Product features BETONTEC H5 hydrophobic impregnation for paving stones:

• Ease and safety of use.
• It is enough to put it on one layer.
• Deep penetrating into a few mm.
• Impregnation vapor permeable.
• Ecological water formula (without LZO).
• Odorless – perfect for use inside i outside.
• Colorless – no impact on the appearance of the substrate.
• Resistance na UV radiation, exposure to chemicals and extreme temperatures (low and high).
• Abrasion resistance thanks to deep penetration.

How to use BETONTEC H5 Hydrophobic Paving Stone Impregnation:

For proper preparation paving stones we recommend cleaning product: SPECIALCHEM BRUK CLEAN

1. Preparing paving stones: For proper preparation of paving stones we recommend the cleaning agent: SPECIALCHEM BRUK CLEAN. Make sure the paving stones are clean i sucha before starting the impregnation. Thorough cleaning of the surface from dirt, contaminants and chemical residues is crucial to the effectiveness of the product.
2. Working temperature: Impregnation should be carried out at a temperature above 5°C.
3. Planning of impregnation: Plan so that by 6 hours no rain was expected after impregnation. This is the time needed for the preparation to effectively penetrate the surface of the block. Surfaces such as glass metal must be protected from contact with the impregnation. In case of contamination, these surfaces should be washed no later than a few hours after contamination water or wet with a cloth sponge.
4. Test on a barely visible fragment: Before applying the product to the entire surface, perform a test impregnation on an inconspicuous part of the block. This will help ensure that the effect is in line with your expectations and does not cause unwanted changes.
5. Applying impregnation: Apply a layer of impregnation to the prepared surface. You can apply one or two layers, preferring the method "wet on wet”, which will ensure the best results and fuller penetration of the preparation.
6. Drying time: Leave the impregnation until dry out. Make sure that there are no obstacles on the impregnated surface that could interfere with the drying process, which will allow the product to work optimally.

1. What distinguishes BETONTEC HYDROPHOBIC IMPREGNATE FOR PAVING STONES H5 from other impregnators?
   BETONTEC H5 uses silane nanotechnology to create a deeply penetrating hydrophobic layer. This provides 6 years of protection against moisture, stains, de-icing salts and UV radiation.
2. What surfaces can be impregnated?
   Paving stones (standard, bevelled, washed with sprinkles), concrete slabs, old pavements, curbs and palisades on driveways, parking lots, terraces and alleys.
3. Does the impregnation change the color or gloss of the substrate?
   No. The colorless formula preserves the natural color and texture of the concrete without creating a film or shine.
4. What is the recommended consumption of the preparation?
   On average 7–10 m² from 1 l of preparation:

• 5 l package is enough for approx. 35–50 m²,
• 20 l packaging for approx. 140–200 m².

5. Is one layer of impregnation enough?
   Yes, one application is usually sufficient. Very absorbent substrates may require a second coat applied immediately after the first, the so-called "wet on wet" method.
6. How long after application does the surface become rain-resistant?
   It should remain dry for at least 3 hours. Foot use is possible after approximately 1 hour.
7. Does impregnation limit the growth of moss and lichen?
   Yes. Hydrophobic impregnation hinders the deposition of organic pollutants, inhibiting the growth of mosses, lichens and algae.
8. How to prepare the surface before application?

1. Wash the surface (e.g. with a pressure washer).
2. Remove efflorescence, oil and lichen.
3. Wait for the concrete to dry completely.
4. Cover plants, glass and metal with foil.

9. What tools are needed for the application?
   It is most convenient to use a pressure sprayer, but you can also use a brush or roller.
10. Is BETONTEC H5 safe for the environment?
    Yes. It is a water-based, VOC-free, odorless and vapor-permeable preparation, suitable for indoor and outdoor use.
11. Does the impregnation increase resistance to road salt in winter?
    Yes. The hydrophobic barrier limits the absorption of chloride solutions, reducing the risk of embrittlement during freeze-thaw cycles.
12. How do I remove excess impregnation or streaks?
    Any excess should be immediately brushed off.
13. Can BETONTEC H5 be used on a damp surface?
    No. The concrete must be dry so that the preparation can penetrate the pores and chemically bind to the substrate.
14. How often should the impregnation be renewed?
    Every 5–6 years.
15. Is BETONTEC H5 suitable for vertical surfaces, e.g. fences?
    Yes. The impregnation works equally effectively on horizontal and vertical surfaces, providing full protection against moisture and dirt.

Have any additional questions? Please contact our technical support department – we will be happy to help you choose the best solution for your surface.

Composition: water, organofunctional silanes.

blonde with tips: www.smartblond.blog

visit us on instagram