NANOPRO WATER-BASED IMPREGNANT FOR PAVING STONE

Name: NANOPRO WATER-BASED IMPREGNANT FOR PAVING STONES - Districhem.eu
Availability: InStock

W NANOPRO IMPREGNATE FOR PAVING STONE technology was used STAY CLEAN, which, thanks to nanoparticles, creates a protective coating on the surface of the cube, making it easier cleaning and protecting against dirt. What's more, deep penetration of impregnation up to a few millimeters provides high abrasion resistance, which has a positive impact on strength and aesthetics of the surface, even with intensive use. Effective protection against fouling microorganisms, mosses and algae make the paving stones remain clean and aesthetic, and is protected against overgrowth of mosses.

Capacity

Clear

Product details

NANOPRO WATER-BASED IMPREGNANT FOR PAVING STONE

Maximum protection against moss, algae, crumbling and erosion

NANOPRO WATER-BASED IMPREGNANT FOR PAVING STONE is an advanced preparation created to provide comprehensive protection of paving stones in a variable climate and with intensive road surface loading. It is based on hydrophobization based on silicate nanoparticles, thanks to which the surface retains clean, original look for up to 6 years. At the same time, the impregnation actively inhibits the growth of mosses and algae, eliminating the problem of green coating at the microstructural level.

Innovative silane nanotechnology

Formula based on active silanes causes microscopic particles to bond tightly with the concrete, creating a durable, abrasion-resistant barrier. Hydrophobic coating effectively repels water and dirt, and UV resistance prevents fading and efflorescence, maintaining the aesthetics of the surface for many seasons.

STAY-CLEAN technology and deep penetration

STAY CLEAN uses a network of nanoparticles to create a smooth, non-stick protective layer:

Deep penetration – up to several millimeters, strengthens the structure of concrete.
Easy to clean – dirt and oil penetrate more difficultly, stains are removed faster.
Strong biological barrier - protection against moss and algae and other microorganisms.

Key winter benefits and year-round durability

Protection against crushing and erosion – in winter, salt, frost and moisture do not degrade the top layer of concrete.
Less snow and ice adhesion – snow removal takes less time, the surface ices up slower.
Preventing salt efflorescence – chlorides do not penetrate deep into the cube, maintaining a uniform color.

The most important advantages of the product

High effectiveness thanks silane nanotechnology.
Protection against dirt, moss and algae - technology STAY CLEAN.
Deep penetration increases abrasion resistance.
UV resistance without changing the natural color of the cube.
Barrier against crumbling and erosion in harsh winter conditions.
Quick drying – surfaces absorb dirt less.
Safe impregnation newly laid paving stones.

Application of NANOPRO WATER IMPREGNATE FOR PAVING STONES

Paving – traditional and colored.
Rinsed cube with sprinkles – color and texture without stains.
Old pavement – preservation of historical character.
Curbs and palisades – elements of small architecture under protection.
Parking surfaces – resistance to oils and high loads.
Terraces and driveways – intensively used home areas.

How to use NANOPRO WATER-BASED IMPREGNANT FOR PAVING STONES:

For proper preparation paving stones we recommend cleaning product: SPECIALCHEM BRUK CLEAN

Working temperature: above 5°C

1. Surface preparation: Make sure that paving jest clean i sucha before starting impregnation. Thorough cleaning surface with dirt, pollution and from the leftovers chemicals is crucial to the effectiveness of the product.
2. Planning of impregnation: Plan so that by 6 hours after impregnation it was not expected rainfall. This is the time needed for the preparation to be effective. penetration in the surface of the cube. Surfaces such as glass metal they must be secured before contact with the impregnator. In case dirt, these surfaces should be within a few hours at the latest after getting dirty rinse with water and/ or wet cloth sponge.
3. Test on a less visible part: Before applying the product to the entire surface, do impregnation test na invisible part cubes. This will help ensure that the effect is in line with your expectations and does not cause unwanted changes.
4. Applying impregnation: Apply to the prepared surface impregnation layer. You can use one layer and/ or two, preferring the method "wet on wet", which will ensure the best results and more complete penetration of the preparation.
5. Drying time: Leave the impregnation until dry out. Make sure that there are no particles on the impregnated surface. obstacleswhich could disrupt the drying process, which will allow optimal performance preparation.

Durability:

about 6 years

Wear:

100 to 150 ml per m²

NANOPRO WATER-BASED IMPREGNANT FOR PAVING STONE is characterised by high efficiency, which makes it an effective solution for impregnating paving stones. Below are approximate data on efficiency depending on the capacity of the preparation:

1 liter: 7 to 10 m²
5 liters: 35 to 50 m²
10 liters: 70 to 100 m²

Question	Odpowiedź
Does NANOPRO WATER IMPREGNATE change the color of paving stones?	No. The product creates transparent, hydrophobic barrier based on silicate nanoparticles, thanks to which the surface retains its original look and invoice.
How long does protection last after a single application?	When the impregnation is applied correctly, the durability is about 6 years, without the need for frequent renovation of the coating.
Does the impregnation protect against moss and algae growth?	Yes. The formula "anti-moss & anti-algae" effectively inhibits the growth of mosses, lichens and microorganisms, keeping the surface clean.
Does the preparation protect the cube against crumbling and erosion in winter?	Tak. Hydrophobization limits the penetration of water and salt, which minimizes crumbling, cracking and erosion the top layer of concrete during frost.
Can it be applied to freshly laid surfaces?	Yes. NANOPRO WATER-BASED IMPREGNANT FOR PAVING STONE It is safe for newly laid paving stones and can be applied after the concrete has completely dried.
What is the recommended usage time for this product?	Medium 100 – 150 ml per m² (1 l covers 7-10 m²; 5 l – 35-50 m²; 10 l – 70-100 m²), depending on the absorbency of the substrate.
What tools are best for application?	Pressure sprayer works well on large surfaces; recommended for details and edges roller or brush.
In what weather conditions should impregnation be performed?	The temperature of the substrate and air should be > 5 ° C, and the forecast guarantees no precipitation for at least 6 hours after application.
Does the preparation facilitate snow removal and prevent salt efflorescence?	Tak. Hydrophobic coating reduces snow and ice adhesion and the anti-chloride barrier reduces salt efflorescence.
Is it worth applying two layers of impregnation?	Yes, the method "wet on wet" (second layer before the first one dries) increases the depth of penetration and extends the protection time.
Does the product protect against oil stains and vehicle dirt?	Tak. Liquid repulsion prevents oil, grease and mud from penetrating deeply into the concrete, making ongoing cleaning easier.
Is NANOPRO WATER IMPREGNANT environmentally friendly?	The water formula is solvent-free, low VOC and safe for plants and soil

see other products for construction: kliknij

Log in to B2B

NANOPRO WATER-BASED IMPREGNANT FOR PAVING STONE

Product details