Nanostone Paving Wet impregnation for paving stones "Wet Effect"

Nanostone Paving Wet impregnation for paving stones "Wet Effect"

NANOSTONE PAVING WET impregnation is an excellent solution for protecting paving surfaces from contamination. Thanks to its use, paving stones gain the effect of "wet paving stones", which improves their appearance. The preparation gives the surface hydrophobic properties, protecting it from stains and dirt accumulation. In addition, the impregnation penetrates deep into the dirt and limits its susceptibility to absorption. After using the product, the color of the substrate is exposed, giving it an elegant appearance. Additionally, impregnated paving stones lose their ability to attract dirt.

The impregnation creates a protective layer on the surface of the paving stone that is resistant to abrasion, which makes it easier to remove oil stains and other greasy dirt. Regular use of the preparation limits the growth of grass and moss and protects against acid rain. Thanks to the protective coating, cleaning the paving stone becomes easier and also makes it easier to remove snow and ice from the surface in the winter.

NANOSTONE PAVING WET impregnation is commonly used in garden architecture, on pavements and parking lots, where the aesthetic appearance of paving stones is important.

Features:

• wet surface effect
• color deepening
• long-term protection against dirt and water
• resistance to UV radiation and bad weather conditions
• STAYCLEAN surface makes cleaning easy
• easy removal of snow and ice from the impregnated surface

Product application:

Preparation for impregnation of dyed paving stones and washed paving stones with sprinkles, old paving stones, palisades, pavements, parking lots.

ATTENTION! It is not recommended to use on NON-DYED gray or white cubes!!!

Efficiency:

10-15 m²/1L. Consumption depends on the application technique and the water absorption capacity of the impregnated material.

Application methods:

garden sprayer, HVLP gun

How to use:

First, clean the block so that it is clean and dry. Sprayers used for application must not be wet with water - they should be dried or rinsed with solvent.

Apply the preparation to the prepared paving stones using the spray method in the form of a fine mist. (Too much impregnation applied in one layer can significantly prolong its drying time.) When applying the impregnation, the material should thoroughly absorb the product. It is recommended to apply two layers at least half an hour apart. By applying the second layer, you will enhance the darkening effect. The paving stones should not come into contact with water for about 2 hours after impregnation.