NANO-BAU FASADA PROTECT H100 for facade impregnation

NANO-BAU FASADA PROTECT H100 for facade impregnation

NANO-BAU FACADE PROTECT H100 is a water-based and colorless hydrophobic impregnation based on Nanotechnology, created to ensure long-term protection acrylic, silicone, silicate and mineral plasters. The product effectively protects facades against dirt, moisture, rain and other atmospheric and microbiological factors.

It works by creating a plaster on the surface. ultra thin, nanometric, invisible protective layer, which effectively repels water and prevents it from penetrating into the surface.

A description of the action:

The hydrophobic impregnation based on nanotechnology uses silicon nano particles, which permanently bond with the structure of the plaster surface for many years. Thanks to this, the impregnation creates an invisible hydrophobic nano-coating, which not only effectively repels water, but also limits the deposition of pollutants transported by rainwater and soot. Additionally, it protects surfaces against the formation of green and gray lichens, fungi, molds and mosses.

Hydrophobic impregnation prevents walls and facades from soaking with rainwater, which helps maintain the original level thermal insulation of buildings. In addition, this coating is characterized by properties self-cleaning, which makes it much easier to keep the plaster surface clean.

Application of NANO-BAU FASADA PROTECT H100 for facade impregnation:

1. Plasters (mortars and facade coatings):
   • plaster, acrylic, decorative plaster, mosaic plaster, mineral plaster, structural plaster, silicone plaster, cement-lime plaster
2. Decorative and structural paint
3. Decorative and construction materials (concrete, stone, brick, tiles):
   • decorative concrete, decorative stone, brick, clinker tile, wall brick, decorative brick, wall bricks, gypsum and concrete bricks, old brick.

ADVANTAGES OF NANO-BAU FASADA PROTECT H100 plaster impregnation:

1. Effective protection against water and dirt: Ultra-thin hydrophobic layer repels rain, snow and dirt, preventing moisture from penetrating and dirt from settling.
2. Multi-year protection (min. 6 years): Durable silicon nano-particles ensure long-lasting effectiveness, even under extreme conditions.
3. Anti-peeling and UV protection: Protects against degradation caused by rain, UV radiation and freeze-thaw cycles.
4. Increased frost resistance: Hydrophobization reduces damage caused by freezing moisture, which is crucial in winter.
5. Permanent superhydrophobic effect: The surface repels water and dirt, working on the self-cleaning principle.
6. Vapor permeability: Innovative technology preserves the natural diffusion of gases without blocking the exchange of water vapor.
7. Resistance to moss and algae growth: Dry substrate eliminates conditions for the development of microorganisms, maintaining the aesthetic appearance of the facade.
8. Improved thermal insulation: A dry façade minimises heat loss, increasing the energy efficiency of the building.
9. Long-lasting aesthetic effect: Prevents plaster from darkening, maintaining its new appearance for years.
10. Resistance to UV and extreme temperatures: Withstands fluctuations from -30°C to +80°C and solar radiation without losing its properties.
11. Protection against moisture: The invisible protective layer blocks water from penetrating the plaster structure, protecting against corrosion and mould.

Efficiency:

NANO-BAU FACADE PROTECT H100 is characterized by very high efficiency, which makes it an ideal solution for all types of mineral facades. The consumption of the preparation is approximately 40 to 60 ml per m². Below are approximate performance data depending on the capacity of the preparation:

• 1 liter: Covers 16,7 to 25 m²
• 5 liters: Coverage ranges from 83,3 to 125 m²
• 10 liters: Covers 166,7 to 250 m²

Thanks to such efficiency, NANO-BAU FACADE PROTECT H100 provides optimal protection and effective coverage of the entire surfaces of mineral facades.

Instructions for use of NANO-BAU FASADA PROTECT H100:

1. Recommended application tools: garden sprinkler, paint sprayer (HVLP), brush or roller.
2. Surface preparation: Cover glass and metal surfaces with foil to prevent them from getting dirty. If dirty, clean them as soon as possible. The surface should be clean and dry before applying the preparation.
3. Preparation of the preparation: Shake well before use – do not dilute.
4. Application: Evenly apply the impregnation to the plaster surface to slightly dampen it. Apply one or two coats wet on wet, depending on your needs.
5. Drying time: After applying the impregnation, leave the plaster to dry for approximately 3 hours.
6. Efficiency test: After drying, check if the impregnation is working effectively by pouring water on the surface. If the water beads on the surface and does not soak into the plaster, it means that the hydrophobic impregnation is effective.

see other products for construction: kliknij

We recommend our blog with tips: kliknij