-
PLN -
EUR
PLN EUR 
Protect your paving stones with impregnation Nano-Bau WET PUB, which offer a unique wet effect. Our product effectively protects against contamination, while improving the aesthetics of the surface and giving it an elegant and modern look. Thanks to its innovative formula, it also provides effective protection against stains and dirt, which makes your paving stones look like new for a long time.
NANO‑BAU WET CUBE impregnation giving a wet effect is a specialist preparation that provides paving stones with not only deep protection, but also an elegant, distinctive "wet" appearance. Thanks to the nanotechnology formula NANO‑BAU WET CUBE impregnation giving a wet effect protects the surface from water, stains and dirt, while deepening the colors and texture of the concrete. NANO‑BAU WET CUBE impregnation giving a wet effect for driveways, terraces or sidewalks, you gain cleaning comfort and easier snow removal in winter.
Protection against moisture - NANO‑BAU WET CUBE impregnation giving a wet effect creates a hydrophobic barrier, preventing the penetration of water, ice and salt.
Increased durability – the coating protects against UV, frost and abrasion, extending the life of the cube.
Easier cleaning – thanks to the “easy‑clean” effect, dirt and oils are more difficult to adhere to the surface.
Color intensification – the preparation brings out the depth of colors and provides a uniform, aesthetic “wet effect”.
Wear: 50 – 80 ml/m² on each of two layers spray (total 0,10 – 0,16 l/m²).
Excessive amounts of the agent may significantly extend the drying time, therefore do not exceed the recommended dose.
| Capacity | Surface with 2 coats |
|---|---|
| 1 l | 7 - 10 m² |
| 5 l | 35 - 50 m² |
| 10 l | 70 - 100 m² |
| 20 l | 140 - 200 m² |
Practice Test - apply NANO‑BAU WET CUBE impregnation giving a wet effect on an inconspicuous part and wait 1 hour.
Preparation – the surface must be clean and dry.
Shower – apply the first layer (50 – 80 ml/m²). After 30 minutes, when it dries slightly, apply the second layer “wet on wet”.
Drying – protect from water for at least 6 hours; light foot traffic after 2 hours; full strength after 72 hours.
Tools – low-pressure sprayer; clean brushes/rollers with solvent (white spirit, acetone) after work.
Cubes and concrete pigment-dyed: driveways, terraces, pavements, garden paths.
Do not use for gray slabs or cubes without pigment – the effect may be uneven.
Summary: By using the phrase “NANO‑BAU WET CUBE impregnation giving a wet effect” in this text you can be sure that the key name of the product is perfectly exposed and memorable!
By following these steps, you will ensure effective protection of your paving stones with NANO-BAU WET CUBE, enjoying its aesthetic appearance and durability for a long time!
For cleaning paving stones we recommend: SPECIALCHEM BRUK CLEAN washing of paving stones
| Question | Odpowiedź |
|---|---|
| 1. What does the “wet effect” and color renewal provide? | Impregnation deepens natural colors and highlights the texture of concrete, as if wet with water, while refreshing the faded color - without artificial shine or film. |
| 2. Does it change the shade of each cube equally? | The intensity depends on the type and absorbency of the bar. Always do attempt on the invisible fragment. |
| 3. How long does the protection and visual effect last? | Typically 3 – 4 years (up to 5 years in favorable conditions). In high traffic areas it is recommended to refresh every 3 years. |
| 4. What surfaces can I apply it to? | Colored paving stones and mass-colored concrete (pigmented). Do not use for slabs or cubes in natural, gray color without pigment – the effect may be uneven. |
| 5. Does the product clog pores (risk of chipping in winter)? | No. It penetrates the concrete structure, maintains vapor permeability and limits water absorption, which minimizes frost cracking. |
| 6. Does the surface become slippery? | After drying, the impregnation does not create a film - it retains natural grip concrete. |
| 7. How much product do I need and how do I apply it? | Apply spray w two thin layers, each 50 – 80 ml/m² (total 0,10 – 0,16 l/m²). Avoid overdosing – excess lengthens drying and may cause stains. |
| 8. What tools are best for application? | Low-pressure sprayer (provides an even mist). If necessary, even out the layer with a roller or wide brush. |
| 9. How many layers should I apply? | two "wet on wet" method with a gap of min. 30 min – apply the second layer when the first one is only slightly dry. |
| 10. What are the minimum weather conditions? | Temperature +10°C - +25°C, no rain and strong wind for at least 6 noon after application. |
| 11. When can I use the surface? | Light foot traffic on 2 noon; full chemical and mechanical resistance after 72 noon. |
| 12. Is the impregnation resistant to UV and road salt? | Yes. It protects the color from fading and limits the penetration of salts, oils and greases. |
| 13. How to clean impregnated cubes? | Usually, pressurized water is enough. Remove tougher stains with a mild concrete cleaner; the impregnation makes it easier to rinse out the dirt. |
| 14. How do I remove excess product from glass or metal? | Wipe the dirty areas solvent (white spirit, acetone) within 2 hours of contact. |
| 15. How to store the preparation? | Tightly closed, at temp. 5 – 30 °C, away from frost and direct sunlight; use within 12 months since opening. |
we invite you to the product profile on INSTAGRAM
