NANO-BAU colorless impregnation for sandstone

NANO-BAU colorless impregnation for sandstone

NANO-BAU colorless impregnation for sandstone is an advanced solution for the protection of all types of sandstones, used both in substratesand on walls or facades buildings. This product provides effective chemical protection at the level nanometric, which translates into protection of the material against penetration water i moisture, and also against the formation of various types dirt i stains, which may negatively affect the aesthetics and durability of the stone.

One of the key advantages Nano-Bau colorless impregnation the advantage of sandstone is that it does not affect the natural vapor permeability sandstone, allowing the material to retain its breathable properties. This allows the sandstone to continue to effectively release excess moisture to the environment, which is important from the point of view of preserving its natural properties and durability.

This product will strengthen the structure of sandstone without changing its appearance, which is particularly important in the context of conservation. sights and objects of special aesthetic value. Additionally, the impregnation reduces the risk of growth mosses and other organisms on the surface of the stone. It is worth emphasizing that the impregnation does not close the pores of the material, which means that the sandstone retains its natural properties "Breathable".

Properties of Nano-Bau colourless impregnation for sandstone:

• Effective protection before water i dirt
• Long-lasting impregnation lasting until 8 years
• Protection against erosion i crumbling
• Increased resistance to frost
• Deep penetration of several millimeters into the stone
• Behavior vapor permeability thanks to technology nanoparticles
• Fouling prevention mosses i algae
• Improving properties thermal insulation
• Maintaining the natural appearance of the stone
• Resistance to UV radiation and extreme temperatures
• Strengthening the structure sandstone
• Water based impregnation – it does not leave a smell, so it can be used inside i outside.

Product application:

NANO-BAU colourless impregnation for all types of sandstone is ideal for use on walls, fences, floors and facades objects. It is also perfect for maintenance monuments and other structures that require effective and long-term protection against negative impacts water, moisture and dirt.

Consumption of NANO-BAU colorless impregnation for sandstone:

The estimated consumption of the preparation is approximately 100 to 150 ml per m². Below are the performance data depending on the packaging capacity:

• 1 liter: Cover from 7 to 10 m².
• 5 liters: Efficiency ranges from 35 to 50 m².
• 10 liters: Cover from 70 to 100 m².
• 20 liters: Efficiency ranges from 140 to 200 m².

We recommend that you carefully calculate the amount of product needed depending on the surface you intend to protect to ensure accuracy i efficiency impregnation.

If old or dirty sandstone is to be impregnated, we recommend using a cleaning agent: SPECIALCHEM SANDSTONE CLEAN

Instructions for use of NANO-BAU colourless impregnation for sandstone:

Application at temperatures above 5°C

1. Personal protective equipment: Before starting work, put on glasses i protective gloves.
2. Weather conditions: Make sure that for a minimum of 3 hours it will not rain after application.
3. Practice Test: Perform a test on an inconspicuous place to assess the effect of the impregnation.
4. Securing the surroundings: Protect plants and surfaces not to be impregnated (especially glass i stole).
5. Instant dirt removal: In case of accidental contamination, clean the surface immediately with a wet cloth. with a cloth or rinse water.
6. Surface preparation: Make sure the surface to be impregnated is clean and dry.
7. Application Method:
   • Recommended method: shower.
   • Avoid creating stains.
   • Adjust your technique to evenly cover the surface.
8. Quantity of preparation: Apply only as much impregnation as the stone can absorb. Spread any excess with a brush or remove with a cloth.
9. Drying time: Allow the surface to dry completely dry to ensure full effectiveness of protection.
10. Number of layers:
    • Recommended: one and/ or two layers.
    • Use the "wet on wet” to avoid inequalities.
11. Cleaning tools: After finishing work, rinse the tools with running water. water.

see other products for construction: kliknij

We recommend our blog with tips: kliknij