Nano-Bau SHOWER CARE Kit impregnation for shower cabins - set

Nano-Bau SHOWER CARE Kit impregnation for shower cabins - set

NANO-BAU GLASS SHOWER Kit is a comprehensive set for long-lasting protection and impregnation of glass elements of shower cabins, glazed ceramics such as tiles, washbasins, toilets, shower trays, etc. The silicon nanoparticles used in the preparation chemically combine with the glass surface or ceramic glaze, strongly hydrophobing them, which gives them dirt-repellent properties , suds, scale deposits and water. Due to hydrophobic impregnation, water transporting calcium deposits and other contaminants does not dry on the protected surface, but flows off it together with dirt under the influence of gravity. In addition, the impregnation refines the surface, thanks to which dirt and deposits that have nevertheless remained on the surface can be removed without chemicals with just water and a cloth.

The use of hydrophobic impregnation significantly reduces the amount of time needed to clean the cabins. NANO-BAU SHOWER Care Kit is ideal not only for individual users but also for hotels, glaziers, etc. A single use of the NANO-BAU SHOWER CARE Kit allows you to protect the surface for up to 3 years.

Features:

• gives hydrophobic properties
• reduces the deposition of suds and calcium deposits
• keeps it clean for a long time
• the protected surfaces become easy to clean
• extends cycles between cleaning - reduces costs
• prevents the stone from etching into the surface
• makes it easier to clean the surface
• protection up to 3 years

Application:

glass elements of shower cabins, ceramic washbasins, shower trays, ceramic tiles, urinals, bidets toilet bowls

Application methods:

Sciereczka

How to use:

Plan the impregnation so that after its completion it does not rain for a minimum of 6 hours.

Use on a pre-descaled, clean and dry surface.

1. The set consists of two preparations. NANO-BAU SHOWER CARE - CLEAN is a milk intended for degreasing and removing limescale residues from previously washed surfaces. Shake the bottle vigorously, then moisten the surface of the sponge with cleaning milk and thoroughly wash the surface to be protected.
2. Use paper towels to wipe off the white powder remaining after cleaning the cabin, but do not rinse it with water. The fine white dust remaining after cleaning does not interfere with the use of the impregnation and may remain.
3. NANO-BAU SHOWER CARE - COAT is a proper impregnation that is applied immediately after degreasing the surface. The impregnation should be applied in fragments, so that after applying the impregnation, polish the surface within 2 minutes. (e.g. 1m² degrease, apply impregnation and then polish the coating).
4. Use a dry and clean cloth to apply. Spray a few times on the cloth so that it is slightly moistened with the preparation and then wipe the surface. When wiping, the cloth should leave a wet trace, if it is not visible, spray the cloth again several times and continue applying. After applying to a piece of glass (e.g. 1 or 2 m²) polish the surface with a clean microfiber cloth to a perfect shine. Repeat the process until the entire surface is impregnated.
5. If, after applying the coating, the preparation left light streaks, it can be wiped with a glass cleaner or liquid with detergent after about 3 hours.

NOTE: The preparation is not used on surfaces such as: plastic, rubber, polycarbonate and metal, dedicated products are used for these surfaces.

Efficiency:

5 to 10 ml/m²

The set includes degreaser, impregnation and impregnation and polishing cloths.

The NANO-BAU brand is the result of the synergy of the extensive commercial knowledge of Mrs. Izabela Jasińska-Ryguła, who for years managed sales departments in renowned construction warehouses, and the advanced technological achievements of NANOBIZ.PL Sp. z o. o. The latter has pioneered the development of the Polish nanotechnology sector since 2007, introducing innovative solutions to the market. In 2021, thanks to the combination of these two areas of competence, we managed to create the NANO-BAU brand, which successfully responds to the growing requirements of specialists in the construction industry. This company, using the latest achievements in the field of nanotechnology, offers products of the highest quality that are adapted to the current and future needs of the construction market.

see other products for construction: kliknij

We recommend our blog with tips: kliknij