NANOPRO IMPREGNATE FOR GYPSUM TILES

NANOPRO Impregnation for plaster tiles

NANOPRO Impregnation for plaster tiles is a water-based, colourless hydrophobic impregnation, created specifically for protecting gypsum, brick and concrete tiles with an absorbent structure that are not covered with varnish. The preparation penetrates deeply into the material, even up to several millimetres, providing protection against dirt, rain, frost, moss and other harmful factors.

NANOPRO Impregnation is intended for use on various gypsum surfaces, such as walls, ceilings or walls. Impregnation gives the properties STAY CLEAN, which effectively protects plaster surfaces against dirt, moisture, freezing and crumbling for up to 6 years . The product can be used both indoors and outdoors. It is odorless, colorless and does not affect the vapor permeability of the substrate.

Benefits of using NANOPRO Impregnation for plaster tiles

• Effective protection against efflorescence, dirt and algae growth, which allows the aesthetics of the bricks to be maintained for longer.
• No effect on appearance bricks and its natural properties – it does not grease or change color, which allows you to keep the brick clean for many years.
• Risk reduction moss and algae growth, which is crucial in humid conditions.
• It enables free breathing bricks, because the impregnation does not close the pores of the material, which ensures adequate air flow.
• Resistance to unfavorable weather conditions – effectively protects against UV radiation, frost and rain.
• Protection against salt efflorescence, which increases the durability of the brick and improves its aesthetic values.
• Perfect for use inside and outside buildings, providing long-lasting protection for floors, walls and brick tiles for up to 7 years .
• Professional protection allows you to enjoy the aesthetics and functionality of brick surfaces.
• Impregnation penetrates up to several mm, which guarantees resistance to washing and abrasion, even in the case of floors.
• Keeps the surface dry, which improves thermal insulation and leads to lower building heating costs.

Product application:

• Gypsum wall tiles (interior and exterior)
• Plaster imitations of other materials
• Gypsum stones
• Gypsum mortars and plasters
• Plaster facades
• Plaster monuments and figurines

Performance NANOPRO Impregnation for plaster tiles

• 10-15 m²/1 l – the consumption of the preparation depends on the application technique and the absorbency of the substrate.

Product performance NANOPRO Plaster Tile Impregnation

Consumption is approximately 100 to 150 ml per m² The consumption of the preparation depends on the application technique and the absorbency of the substrate and the application method

Approximate performance data depending on the capacity of the preparation:

• 1 liter: Cover from 7 to 10 m².
• 5 liters: The efficiency ranges from 35 to 50 m².

How to use NANOPRO Impregnation for plaster tiles

To effectively protect your cast, follow the steps below, remembering to use the product in temperature above 5°C.

1. Take the test: Always test on a small area at the beginning of work to make sure that the effect achieved is the desired one.
2. Protect other surfaces: Make sure that glass and metal surfaces are protected from the impregnation. If they become dirty, clean them with water and detergent within a maximum of 2 hours.
3. Material preparation: Check if the material you are going to impregnate is clean and dry.
4. Impregnation application: Apply the appropriate amount of the preparation using the method spray, using only one layer.
5. Alternative application technique: For more intensive protection you can apply two layers method "wet on wet".