Specialchem WET LOOK Impregnation for Pavement
A product for impregnation of paving stones, giving the effect of a "wet surface" - deepening the color. The applied formula provides long-term protection against dirt, water and stains. In addition, thanks to nanoparticles, we obtain a STAYCLEAN surface, which is easy to clean. In winter, it facilitates ice removal and snow removal. Hydrophobic, protecting against water and stains. Resistant to UV and bad weather conditions. Reduces the risk of fungus and mold The material becomes resistant to dirt, water and stains.
SPECIALCHEM for cleaning paving stones - BRUK CLEAN
The preparation is intended for cleaning paving stones, concrete blocks, walls, driveways, car parks, concrete and old paving stones. Perfectly removes atmospheric deposits, soot, stains of plant origin and other dirt. It is effective and also refreshes the appearance of paving stones. It is an alkaline preparation, safe for the user and fully biodegradable. Contains no solvents
A product for impregnation of paving stones, giving the effect of a "wet surface" - deepening the color. The applied formula provides long-term protection against dirt, water and stains. In addition, thanks to nanoparticles, we obtain a STAYCLEAN surface, which is easy to clean. In winter, it facilitates ice removal and snow removal. Hydrophobic, protecting against water and stains. Resistant to UV and bad weather conditions. Reduces the risk of fungus and mold The material becomes resistant to dirt, water and stains.
Features:
Product application:
Preparation for impregnation of dyed paving stones and washed paving stones with sprinkles, old paving stones, palisades, pavements, parking lots.
ATTENTION! It is not recommended to use on NON-DYED gray or white cubes!!!
Efficiency: 10-15m²/1L. Consumption depends on the application technique and the absorbability of the impregnated material.
Application methods:
garden sprayer, HVLP gun
How to use:
First, clean the material so that the surface is clean and dry.
Sprayers used for application must not be wet with water - they must be dried or flushed with solvent.
Apply the preparation in the form of a fine mist on the prepared cube by spraying. (Too much impregnation applied in one layer can significantly prolong its drying.)
When applying the impregnation, the material should thoroughly absorb the product.
It is recommended to apply two layers at intervals of at least half an hour.
By applying a second layer, you will strengthen the darkening effect.
Paving stones should not come into contact with water for about 5 hours after impregnation.
Composition: aliphatic hydrocarbons <90%, polymers, siloxanes.
Security and storage:
Follow basic health and safety rules. Keep the product tightly closed and out of reach of children and pets. Avoid contact of the preparation with skin and eyes. Before use, it is recommended to read the technical data sheet of the preparation. Store in the temperature range of 5-30 C.
Precautions:
EN: H304 May be fatal if swallowed and enters airways, EUH066 Repeated exposure may cause skin dryness and cracking, P301 + P310 If swallowed: call a poison center or doctor immediately, P331 Do NOT induce vomiting, P405 Store locked up . P501 Dispose of contents/container to authorized waste disposal company.
SPECIALCHEM for cleaning paving stones - BRUK CLEAN
The preparation is intended for cleaning paving stones, concrete blocks, walls, driveways, car parks, concrete and old paving stones. Perfectly removes atmospheric deposits, soot, stains of plant origin and other dirt. It is effective and also refreshes the appearance of paving stones. It is an alkaline preparation, safe for the user and fully biodegradable. Contains no solvents.
– Easy cleaning of paving stones
– Safe for the material and the user
– Does not have a negative impact on the environment
– Removes even stubborn dirt and deposits
Product application:
The product is intended for cleaning concrete paving stones, old paving stones, ceramic paving stones and any other on substrates, driveways and parking lots.
Features:
Efficiency:
0,08 l/m² - 0,15 l/m² (maximum dilution 1:5)
Consumption depends on the application technique and the soiling of the surface.
How to use:
The preparation can be used with a garden sprinkler or foam gun and a high-pressure washer.
The preparation can be diluted with water in a ratio of 1:2 or used undiluted, depending on the degree of soiling. Apply on a slightly moistened surface with a foam gun, garden sprinkler or brush and leave for about 10 minutes. If during this time the surface starts to dry, lightly spray with water.
After about 10 min. wash the surface with pressurized water. For spot stains, you can use a hard bristle brush.
Security and storage:
Follow basic health and safety rules. Keep the product tightly closed and out of reach of children and pets. Avoid contact of the preparation with skin and eyes. Before use, it is recommended to read the technical data sheet of the preparation. Store between 5-30°C.