Log in to B2B

free delivery  from PLN 100

Set for concrete - Nano-Bau Beton Pro impregnation + cleaning with Specialchem ​​Beton Cleaner

A modern, nanotechnology-based water impregnation for colorless protection of surfaces made of high-density vibrated concrete with additions of plasticizers. The impregnation agent is extremely effective in impregnating and strongly hydrophobing substrates made of high-class concrete.

Product for effective cleaning of concrete surfaces, edges, concrete terrace slabs, garden architecture made of concrete and other concrete products. Very well removes dark deposits, dirt caused during everyday use

 

Product details

 

Set for concrete - Nano-Bau Beton Pro impregnation + cleaning with Specialchem ​​Beton Cleaner

A modern, nanotechnology-based water impregnation for colorless protection of surfaces made of high-density vibrated concrete with additions of plasticizers. The impregnation is extremely effective in impregnating and strongly hydrophobing substrates made of higher classes of concrete, i.e. C25, C30, C35.

The use of the preparation guarantees that water and other impurities do not soak into the substrate made of concrete, thanks to which concrete surfaces are protected against the penetration of salts transported by water, acid rain or other substances that have a negative impact on concrete.

Protection against water penetration into concrete protects against corrosion of reinforcement in concrete substrates, which is responsible for concrete cracking. In addition, impregnation with NANO-BAU Beton Pro inhibits erosion, moss growth, formation of salt efflorescence, or dirt itself and its penetration into the interior the ground.

Hydrophobic impregnation also increases the strength of concrete and its frost resistance. In the autumn and winter, frost makes the concrete more vulnerable to freezing moisture causing internal stresses

and microcracks, and consequently its erosion.

Thanks to the penetration up to a few millimeters, the impregnation is resistant to mechanical abrasion, which allows it to be used on walls as well as on floors or parking lots. The use of nanoparticles guarantees the unchanged vapor permeability after impregnation, the product does not clog pores, does not lubricate and does not limit gas diffusion and water vapor removal.

NANO-BAU Beton Pro impregnation can be used inside and outside buildings.

APPLICATION METHODS:

Low pressure spray (HVLP or garden sprayer), roller, brush, immersion.

EFFICIENCY:

10-15 m² per liter

Consumption depends on the application technique and the water absorption of the concrete.

PRODUCT APPLICATION:

It is ideal for impregnation of smooth and vibrated concrete of low water absorption, i.e. concrete pots, concrete accessories, architectural concrete, concrete driveways, concrete facades of buildings, as well as paving slabs or products such as fencing panels and other prefabricated elements.

FEATURES:

  • Protects concrete surfaces against dirt, moss and algae growth.
  • Strengthens the material and protects against freezing
  • It does not change the original appearance of concrete - it does not grease, it is not suitable

gloss

  • Does not slip
  • Prevents the formation of salt and cement efflorescence
  • It does not close the pores of the material - it does not limit vapor permeability
  • Resistant to negative weather conditions and

UV rays

  • Long-term operation up to 8 years

DIRECTIONS:

Plan the impregnation so that after its completion it does not rain for at least 3 hours. At the beginning, always test in an inconspicuous place and check if the effect is there

desirable!

Protect plants and all other surfaces not to be impregnated with foil, especially glass and steel. In case of contamination, clean these surfaces immediately with a wet cloth or rinse with water. The surface prepared for impregnation must be clean and dry.

It is best to apply the appropriate amount of the preparation on the surface by spraying, but so that the impregnation does not create streaks - apply only as much impregnation as the concrete is able to absorb, the excess should be spread with a brush or removed with a cloth. Leave to dry.

ATTENTION! Apply one or two coats but only wet on wet.

Tools should be rinsed with running water.

Product for effective cleaning of concrete surfaces, edges, concrete terrace slabs, garden architecture made of concrete and other concrete products. Very well removes dark deposits, dirt caused during everyday use. Refreshes the appearance of concrete surfaces. For use in manual washing, in high-pressure devices and cleaning machines. Unlike acid preparations, it is safe for surfaces and vegetation - biodegradable, solvent-free.

Efficiency:

10 to 20 m2 per litre

Instruction:

It is recommended to use protective glasses and gloves.

Apply to a slightly damp surface. Before use, test on an inconspicuous part of the surface. Do not use on aluminum. Surfaces not to be subjected to the cleaning process should be protected before cleaning.

Depending on the method of application and degree of soiling, use a concentrate or dilute up to 1:10

garden sprayer:

dilute at least 1:1 with tap water. Lightly moisten the surface to be cleaned and then spray the cleaning agent. Do not allow the agent to dry on the surface, when it starts to dry, sprinkle it lightly with water. The preparation should lie on the surface for about 5 to 10 minutes. Brush in extremely dirty areas. Rinse with water under pressure or preferably with water from a pressure washer.

Pianist:

use concentrate. Lightly moisten the surface to be cleaned and then, using a foam gun, apply the foam evenly on the surface. Do not allow the agent to dry on the surface, when it starts to dry, sprinkle it lightly with water. The preparation should lie on the surface for about 5 to 10 minutes. Brush in extremely dirty areas. Rinse with water under pressure or preferably with water from a pressure washer.

Composition: sodium hydroxide <10%, surfactants <20%.

Precautions:

H319 Irritating to eyes, H315 Irritating to skin, P102 Keep out of the reach of children, P302+P352 In case of contact with skin: wash with plenty of water. P305 + P351 + P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.

The NANO-BAU brand is the result of the synergy of the extensive commercial knowledge of Mrs. Izabela Jasińska-Ryguła, who for years managed sales departments in renowned construction warehouses, and the advanced technological achievements of NANOBIZ.PL Sp. z o. o. The latter has pioneered the development of the Polish nanotechnology sector since 2007, introducing innovative solutions to the market. In 2021, thanks to the combination of these two areas of competence, we managed to create the NANO-BAU brand, which successfully responds to the growing requirements of specialists in the construction industry. This company, using the latest achievements in the field of nanotechnology, offers products of the highest quality that are adapted to the current and future needs of the construction market.

see other products for construction: kliknij

We recommend our blog with tips: kliknij

 

We also recommend