Sandstone set - SPECIALCHEM cleaning + NANO-BAU impregnation

Sandstone set - SPECIALCHEM cleaning + NANO-BAU impregnation

Preparation for cleaning all kinds of sandstones, limestones, granite, river stones and shales. It is specifically designed for use on fences, patios, walkways, driveways and parking lots. Very well removes dark deposits, dirt caused during everyday use. Refreshes the appearance of stone surfaces. For use in manual washing, in high-pressure devices and cleaning machines. Unlike acid preparations, it is safe for stones and vegetation - biodegradable, does not contain solvents.

Features:

• easily and effectively cleans paving stones and other mineral surfaces
• copes with most everyday dirt, soot, dust, etc.
• concentrated and easy to use - foam gun or garden spray recommended
• does not contain ingredients toxic to plants and the environment

Efficiency:

10 to 20 m2 per litre

Instruction:

It is recommended to use protective glasses and gloves.

Apply to a slightly damp surface. Before use, test on an inconspicuous part of the surface. Do not use on aluminum. Surfaces not to be subjected to the cleaning process should be protected before cleaning.

Depending on the method of application and degree of soiling, use a concentrate or dilute up to 1:10

garden sprayer: 

dilute at least 1:1 with tap water. Lightly moisten the surface to be cleaned and then spray the cleaning agent. Do not allow the agent to dry on the surface, when it starts to dry, sprinkle it lightly with water. The preparation should lie on the surface for about 5 to 10 minutes. Brush in extremely dirty areas. Rinse with water under pressure or preferably with water from a pressure washer.

Pianist: 

use concentrate. Lightly moisten the surface to be cleaned and then, using a foam gun, apply the foam evenly on the surface. Do not allow the agent to dry on the surface, when it starts to dry, sprinkle it lightly with water. The preparation should lie on the surface for about 5 to 10 minutes. Brush in extremely dirty areas. Rinse with water under pressure or preferably with water from a pressure washer.

Composition: sodium hydroxide <10%, surfactants <20%.

Precautions: 

H319 Irritating to eyes, H315 Irritating to skin, P102 Keep out of the reach of children, P302+P352 In case of contact with skin: wash with plenty of water. P305 + P351 + P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.

Impregnate for hydrophobic protection of all types of sandstone. It is perfect for substrates, walls and facades. It chemically protects the entire structure of the material at the nanometer level, protecting it against the penetration of water and moisture as well as the formation of dirt and stains. It leaves the natural vapor permeability of the material. Protection resistant to the negative effects of external factors, including UV radiation. It improves durability and strengthens the structure of the material. The product does not change the natural appearance of the material.

Product Features:

• Strengthens and protects the entire sandstone structure
• It does not change the appearance of the material
• Reduces the risk of moss growth
• Does not close the pores of the material - the material continues to "breathe"
• Resistant to negative factors
• atmospheric conditions, including UV radiation

 Product application:

Preparation for the protection of sandstones of all kinds on walls and fences, floors, facades, objects such as monuments, etc.

 Durability: Up to 8 years

 Efficiency: 10m²/1l - 0,1l/m². Consumption depends on the application technique and the absorbency of the impregnated material

 How to use:

• Remember, at the beginning of work, always make a test and check if the effect is desired!
• The material prepared for impregnation must be clean and dry.
• Apply the appropriate amount of the preparation to the material by spraying (only one layer!).

In the case of polished or honed stone, wipe off the excess with a cloth or paper towel.

Make sure that the material is not in contact with water for at least 2 hours.

The NANO-BAU brand is the result of the synergy of the extensive commercial knowledge of Mrs. Izabela Jasińska-Ryguła, who for years managed sales departments in renowned construction warehouses, and the advanced technological achievements of NANOBIZ.PL Sp. z o. o. The latter has pioneered the development of the Polish nanotechnology sector since 2007, introducing innovative solutions to the market. In 2021, thanks to the combination of these two areas of competence, we managed to create the NANO-BAU brand, which successfully responds to the growing requirements of specialists in the construction industry. This company, using the latest achievements in the field of nanotechnology, offers products of the highest quality that are adapted to the current and future needs of the construction market.

see other products for construction: kliknij

We recommend our blog with tips: kliknij